Stainless Steel Rail Mounting Bracket for HazLok HL-O Light (SS304) | RMB-HLO-SS304

Mount a HazLok HL-O light on any handrail, guard rail or pipe from 1" to 2-1/2". The RMB-HLO-SS304 is a laser cut 5 mm stainless steel 304 plate that bolts to the HL-O ceiling mount base and clamps to the rail with two stainless U-bolts. It is made for walkways, stairs, docks, platforms, marine decks and plant areas where a wall or ceiling mount isn't available.

• Fits 1" to 2-1/2" pipe or rail: slotted U-bolt holes take leg centres from 1.34" to 3.54" [34 to 90 mm] for 3/8", 1/2", M10 or M12 U-bolts.
• Level on a stair rail: three pairs of fixture holes let you mount the light at 0°, +45° or -45° so it hangs level on a horizontal rail or a 45° stair rail.
• Flush countersunk mounting: six M6 countersunk holes keep the screw heads flush on the rail side.
• Centre wiring hole: a 1-1/2" [38.1 mm] hole through the middle allows wiring for fixtures with a centre wire entry.
• Built to last outdoors: stainless steel 304 plate and hardware for corrosion resistance in wet and coastal sites.

In the box: 1 x bracket plate 8" x 5" x 5 mm SS304; 2 x M6 flat head screws with washers, lock washers and nuts.

U-bolts sold separately: rails come in many sizes, so order the stainless U-bolt kit (2 U-bolts with washers, lock washers and nuts) that matches your rail or pipe size.

AdaptorMount® stainless steel rail mounting bracket for the HazLok LED HL-O fixture.